Results 1 to 8 of 8

Thread: Picture of your boat?

  1. #1
    Join Date
    Jan 2005
    Location
    Sebastian, FL, USA, Earth
    Posts
    23,904

    Default Picture of your boat?

    Lets put a picture of our boats or even past boats on the message board.



    This is Andy Guibord in his 8' Keaton fiberglass tri-hull.
    Bill Kiene (Boca Grande)

    567 Barber Street
    Sebastian, Florida 32958

    Fly Fishing Travel Consultant
    Certified FFF Casting Instructor

    Email: billkiene63@gmail.com
    Cell: 530/753-5267
    Web: www.billkiene.com

    Contact me for any reason........
    ______________________________________

  2. #2
    Join Date
    Jan 2005
    Location
    Grants Pass, OR
    Posts
    921

    Default Picture of your boat?

    Valco 8 foot pram that is now going on 31 years old. Paid a guy $100 for it.
    Gordon Langenbeck
    Grants Pass, OR

  3. #3
    Join Date
    Jan 2005
    Location
    Sebastian, FL, USA, Earth
    Posts
    23,904

    Default Re: Picture of your boat?

    Great Gordon,

    Finally a picture of you.

    That boat still looks new. Probably worth $500 now?

    Can see where the old 'CF' number was.

    Joe Shirshac still uses his 8' Valco pram on the American with a small 6hp outboard for Stripers in the Spring and summer.

    I will try to get a picture of him in it.

    Here is andy with his 8' Keaton fiberglass tri-hull.




    Boats are really cool.......
    Bill Kiene (Boca Grande)

    567 Barber Street
    Sebastian, Florida 32958

    Fly Fishing Travel Consultant
    Certified FFF Casting Instructor

    Email: billkiene63@gmail.com
    Cell: 530/753-5267
    Web: www.billkiene.com

    Contact me for any reason........
    ______________________________________

  4. #4
    Join Date
    Jan 2005
    Location
    Lake Oroville
    Posts
    255

    Default Here's mine

    This is my two man pontoon boat. It is pretty much brand new, I have used it four times, once down the American, once down the Sac, and the other two times were at lake Amador. Lots of fun, and still learning how to row it from point A to point B. And I have only almost killed myself (and my friend) only one times so far.

    Here's a pic of the boat, it's kind of dark (Thanks for showing me how to post this pic Adam)



    Kind of a funny story to this picture... I went with the guy who taught me how to fly fish... his name is Rick, well, Rick used to drift the sac alot. And we decided to drift from the Posse grounds down to... I forget what our takeout was called, but it was the one that is right after the third bridge from the Posse grounds (pretty short drift).

    Well, it was getting dark, and Rick saw the bridge (the one in the pic) and thought our takeout was below that one, so he said we have a little more time to fish before dark. But by the time we stopped fishing and began to drift to our takeout he said. "Ryan... I think I might have just made an ass out of myself." And it turned out our takeout was after the next bridge, and not the one in the background! So we drifted about 45 minutes in the dark. Sort of scarry, really cold, but fun. A great end to a lousy... but fun day of fishing![img][/img]
    Ryan Williams

    Nor Cal Fly Fishing Guide

    https://flyfishcnv.com/

  5. #5
    Join Date
    Jan 2005
    Location
    Southern California
    Posts
    205

    Default

    Bill:

    I'll have to wait until I return to Michigan this summer to take a photo of my familiy's old drift boat that I use every year, but it looks like this one, except for the modern seats that we don't have. It is an Au Sable Riverboat, which is usually about 24 ft long by 2.5 ft wide, with a flat bottom. They were first build in the 1870s, and they are great for a guide in the back, plus one or two more fishermen who are spread out comfortably. These days, many fishermen put a trolling motor on the back, but traditionally, you controlled these boats with a long pole (that's what I do), and one can even pole the boat upstream for long distances (miles). Ours dates back probably 60 years, but they still make them in the Grayling area. I wonder why long, slim boats have not caught on elsewhere, such as the west? I realize that the typical pine or cedar Au Sable Riverboat would probably be smashed to splinters on boulders in many western rivers, but the basic concept of a long narrow boat is so conducive to fly fishing, that I wonder why it has not been developed further. Any thoughts on this design vs. the typical western drift boat that crams fly fishermen into dangerously close contact?

    [/img]
    Don C.

  6. #6
    Join Date
    Jan 2005
    Location
    Sacramento
    Posts
    7,786

    Default Long, Slim Boat Design

    Hi Don,..... Do you mean the long, slim, flat bottom design shown in the picture I have a 17' Old Town canoe that measures about 36" wide. Kayaks are long, slim designed.....

    Even tho it's obviously an elegant design, maybe there just isn't any market for them out here......

  7. #7
    Join Date
    Jan 2005
    Location
    Auburn
    Posts
    48

    Default

    On the Rogue...



    BTW, cool boat Don Cooksey!

  8. #8
    Join Date
    Jan 2005
    Posts
    761

    Default

    I have a 9' pontoon and this new Kayak.
    Rob



Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •