Page 4 of 5 FirstFirst 12345 LastLast
Results 31 to 40 of 45

Thread: Boat Recommendations for Lower A, Yuba and Lower Sac?

  1. #31
    Join Date
    Sep 2010
    Location
    Granite Bay, CA
    Posts
    505

    Default

    Tcorfey, thanks for your comments. I have an SUV that can tow, but I was thinking of transporting the deflated pontoons inside, and the frame on the roof. My friend who owns one even transports the fully inflated & assembled version on his roof. To me the biggest drawback is being unable to maneuver the boat and fish at the same time, as you can with the flipper-style ones. Then I discovered this Dave Scadden option where you can do both: stand and fish, or sit and fish while using flippers:

    https://www.davescaddenpaddlesports....tlaw-avenger-x
    TroutSource.com
    we deliver the river

  2. #32
    Join Date
    Jan 2005
    Location
    Sebastian, FL, USA, Earth
    Posts
    23,837

    Default

    One true fact in all this is as soon as you get anything to float you, it will open up an entirely new fly fishing world.



    We started in the 1960s with old round doughnut-style canvas-covered truck innertubes called float tubes.

    Then in the 1970s round float tubes kept getting bigger and better with Cordura skins.


    Then came the far more convenient V-boats and U-boats.


    Next, for still water, many went to 8 and 10 foot prams with oars, electric motors and small outboard motors.


    The pontoon boats were popular for lakes and rivers and still are a great option.


    Canoes were always around and then kayaks took over and now some are using Stand Up Paddleboards.


    I really like a 14-15 foot wider Jon boat on a trailer with a new small four-stroke outboard, bow-mounted electric and oars.

    This is a very practical boat for small, calmer water for two anglers.$15,000


    After that many have been using a 16-17 foot Jon boat on a trailer with a tiller outboard jet, bow-mounted electric and long oars.

    This boat is a very popular choice and compromise for lakes, the delta and our rocky rivers. $20,000


    Drift boats are popular for "moving water/rivers/streams" for trout, Steelhead, Stripers and Shad.

    In Montana, you will even see them on lakes, fly fishing for trout.


    Then you have some using bass boats in the Delta and reservoirs for bass, trout and Stripers.



    Today many have serious 17-20 foot aluminum or fiberglass fishing outboard skiffs with decks front and rear.

    These boats are good for reservoirs, the Delta, Bays and inshore saltwater.



    If you need any help designing or choosing a flotation devise, just go into Kiene's on the weekend and talk with Andy Guibord.
    Bill Kiene (Boca Grande)

    567 Barber Street
    Sebastian, Florida 32958

    Fly Fishing Travel Consultant
    Certified FFF Casting Instructor

    Email: billkiene63@gmail.com
    Cell: 530/753-5267
    Web: www.billkiene.com

    Contact me for any reason........
    ______________________________________

  3. #33
    Join Date
    Oct 2013
    Location
    alameda
    Posts
    448

    Default

    Scadden has some pretty nice ideas, just have to be patient on parts and returns as they are a small shop.

  4. #34
    Join Date
    Sep 2010
    Location
    Granite Bay, CA
    Posts
    505

    Default

    Any thoughts on whether this Boulder Boatworks River Skiff would be suitable for the Lower A and Lower Yuba?

    https://www.boulderboatworks.com/river-skiff/

    RIVER SKIFF BENEFITS:

    Lighter, Faster, and Easier to Row.

    Best For Low Gradient Water.

    Lifetime Hull Guarantee.
    TroutSource.com
    we deliver the river

  5. #35
    Join Date
    Oct 2013
    Location
    alameda
    Posts
    448

    Default

    Personally I would prefer a power drifter like this one

    https://driftwoodboatsllc.com

  6. #36
    Join Date
    Sep 2010
    Location
    Granite Bay, CA
    Posts
    505

    Default

    Funny, I was also looking at this:

    https://www.clacka.com/boats/magnum-power-drifter/
    TroutSource.com
    we deliver the river

  7. #37
    Join Date
    Jan 2005
    Location
    Sebastian, FL, USA, Earth
    Posts
    23,837

    Default

    There must be about 6 companies making "power drifters" that have evolved into really good river runners.

    They are a jet boat/drift boat combo.

    They must be $30,000 or more.
    Bill Kiene (Boca Grande)

    567 Barber Street
    Sebastian, Florida 32958

    Fly Fishing Travel Consultant
    Certified FFF Casting Instructor

    Email: billkiene63@gmail.com
    Cell: 530/753-5267
    Web: www.billkiene.com

    Contact me for any reason........
    ______________________________________

  8. #38
    Join Date
    Sep 2010
    Location
    Granite Bay, CA
    Posts
    505

    Default

    I decided to go nuts and I’m buying a 2-yr old demo version of this:

    https://www.boulderboatworks.com/river-skiff/

    Need to drive to Carbondale, CO to pick it up.

    I may have picked the wrong year to buy a boat.
    TroutSource.com
    we deliver the river

  9. #39
    Join Date
    Oct 2013
    Location
    alameda
    Posts
    448

    Default

    Looks like a nice boat! Good job!

  10. #40
    Join Date
    Sep 2010
    Location
    Granite Bay, CA
    Posts
    505

    Default

    Thanks! I can't wait to try it out.
    TroutSource.com
    we deliver the river

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •