Results 1 to 6 of 6

Thread: Redington Behemoth drag upgrade

  1. #1
    Join Date
    Sep 2011
    Location
    Byron Bay,Australia
    Posts
    269

    Default Redington Behemoth drag upgrade

    Many owners of the Redington Behemoth enjoy the value in this reel but some had issues with water ingress in the bearing (particularly salt water) so hereís a better quality bearing you can easily retrofit.Itís a fairly common anti-reverse bearing and (e.g.) is used in the Shimano Calcutta (HFX NTN enscribed on the bearing) Hope this helps.

  2. #2
    Join Date
    Sep 2011
    Location
    Byron Bay,Australia
    Posts
    269

    Default

    The part number is BNT5421 and is used in many reels including the Shimano Curado.It will fit all sizes of the Behemoth series.

  3. #3
    Join Date
    Sep 2011
    Location
    Byron Bay,Australia
    Posts
    269

    Default

    If you type that bearing into Google you’ll get prices From $4 to $40 so look for ones that have 11 or even 13 rollers in them.

  4. #4
    Join Date
    Jan 2015
    Location
    Bishop, California
    Posts
    745

    Default

    Super cool that you figured this out. Thanks for the info!

  5. #5
    Join Date
    Jun 2011
    Location
    Fort Collins, CO
    Posts
    332

    Default

    Peter -

    As always, great information. This Forum is so very fortunate to have your expertise and friendship!

    Best Regards, Bob

  6. #6
    Join Date
    Sep 2011
    Location
    Byron Bay,Australia
    Posts
    269

    Default

    Thanks for the kudos Bob,but it's turned out the information I've provided thus far is incorrect (albeit no fault of mine I should add).
    So apologies to all.The correct bearing is the BNT2396.
    Thanks and Cheers
    Peter

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •