Originally Posted by
itsbenlong
I know you didn't ask for how to diy and you may already know this but if you only have a bunch of pin hole leaks on your waders, just turn them inside out and put some rubbing alcohol in a spray bottle .... spray them lightly and all the holes will appear....mark w/ pen...let dry...rub some aqua seal in each hole and drop a small bead over top...let dry. Fast and easy!
If you use a high enough percentage of alcohol (>90%) you don't even need to wait for the alcohol to dry. Put aquaseal right on the pinholes and rub it in. The aquaseal won't even stick to your finger if its wet from the alcohol. Unfortunately, the alcohol trick doesn't work on all waders. I have not been able to repair several non-Goretex Simms waders using the alcohol trick.
“There is a cult of ignorance in the United States, and there has always been. The strain of anti-intellectualism has been a constant thread winding its way through our political and cultural life, nurtured by the false notion that democracy means that 'my ignorance is just as good as your knowledge.”
― Issac Asimov
Bookmarks