http://www.youtube.com/watch?v=bgFGdH4xhsE
Thanks to Pacific Fly Fishers in WA - https://pacificflyfishers.com/
We have one of these at Kiene's Fly Shop too.
__________________________________________________ ___
Ideas about using welded loops:
Don't use a knot like a clinch knot in a welded loop.
Loop to loop is better.
Don't use small diameter tippet material straight to your welded loop because it will usually cut into the loop material.
Use a larger mono for a butt section so it won't cute into your welded loop.
Some use an Albright knot in the welded loop for heavy salt water use.
__________________________________________________ ______
Some lines weld better than others. As a rule Airflo floating lines weld up very well.
We have a Rajeff/Airflo welded loop center. Some fly shops can put welded loops and welded splices in your line as you wait.
If you shooting line wears out near the casting end from friction of double hauling we can cut it back 5 to 10 feet and weld in another loop.
If the welded loop on the end of your floating line hinges and fractures we can cut if off and weld up another loop on it just as the factories do.
Welded loops have come a long ways......
Bookmarks