21' North River Commander

I have my Commander up for sales and wanted to offer up to the local community before going out to other sources.
Well cared for boat used for Fly Fishing

***** BOAT HAS BEEN SOLD***** VERY HAPPY CONSIDERING OR CURRENT ECONOMIC TIMES

2003 21' North River Commander Jet Boat $ 28,000.00

Chevy 350 V8 Port Fuel Injected 330 HP 323 hours
Hamilton 212 Jet with three stage SS impeller
Honda 9.9 Kicker Motor 4 Stroke Long Shaft


LeeLock Anchor System with 40 pound can anchor
Prewired for 24 volt Trolling motor set up for Leelock Anchor System
2ea New deep Cycle batteries with 3 Bank Charger for Trolling Batteries
2ea 1 year old Deep cycle batteries and 2 Bank Charger for Main power Batteries
Poly Planar Waterproof Stereo with wireless remote AM/FM W/ CD and wireless capabilities
2ea 8" sub boxes 2 6 X 9 Infinity speakers and 2 6" Infinity Coax speakers with 2 4 Channel Amps
Full Towing Cover for storage or towing
Canvas top with removable side vinyl windows with all hardware.
Lowrance HDS 7 Color GPS/Chartplotter fish finder on a ram mount for front of boat
Furuno GP-1650WD Color GPS/DGPSD Chartplotte/Navionics Fishfinder at helm
Furuno LS-6100 Echo/Sounder Fishfinder at back of boat
Polished Aluminum 2 Axle Trailer with spare with brakes and upgraded hubs.
Boat and trailer always serviced every year and well cared for.

Original Owner

Will work on posting pictures but can send pictures upon request.

Link below showing a current Commander build from Factory

[url]https://www.northriverboats.com/commander-spec-sheets[/url




Thanks
Erik B

This is a Lifetime jet boat......super high quality.

Heavy gauge all weld aluminum hull.

Chevy 350 V8 is the most popular inboard for boats and for hot rods.

These are very dependable car and truck motors that run forever if serviced.

Hi Eric,

sent you a pm.

Thanks.

Quote:

---

Originally Posted by boomer4

Hi Eric,

sent you a pm.

Thanks.

---

FYI. The boat is also listed on Delta Marine Sales. Check out page 3 on their boat inventory page.

Thanks,
Erik

Christmas Bump.

Hi Erik,
Nice boat! By any chance does the trailer tongue have one of those fold-away hinges on it? (determine if it'll fit in my garage)

What's the distance from the tip of the nose to the forward end of the hitch coupler?

Also, does it have pre-drilled holes and/or a mounting bracket for a Minn Kota bow mount trolling motor?

Thanks, M

Quote:

---

Originally Posted by Mark V

Hi Erik,
Nice boat! By any chance does the trailer tongue have one of those fold-away hinges on it? (determine if it'll fit in my garage)

What's the distance from the tip of the nose to the forward end of the hitch coupler?

Also, does it have pre-drilled holes and/or a mounting bracket for a Minn Kota bow mount trolling motor?

Thanks, M

---

Sent you 2 PM's

Boat has been sold. Thanks for looking.