PDA

View Full Version : WTB: any Lamson LP clutches.



luckydude
01-02-2017, 05:59 PM
I'm a Lamson LP nut. I just counted and I have:

2 LP 1's
3 LP 1.5's
1 LP 1.5 lite (click and pawl, not a fan but it never breaks)
2 LP 2's.

I love these reels, one of my clutches is about to die. I'm starting to look at the Bauer reels because they are light and I love light reels, I fish 3wt reels on 5wt rods. But if I could buy just a few backup clutches I think I'd be using the original lamson LPs for the rest of my life.

Thanks if you can help me out. And the one that I think is about to die, here is why. On a well performing clutch I can reel in a bunch of slack line but just sort of wacking the outside of the reel to spin it (I'm sure you guys do that too, I learned it from one of you). The reel that is so so has a clutch where it doesn't spin.

I'm inclined to soak it in some cleaning fluid and then soak it in some fairly light oil and see if it gets better. Anyone have any thoughts on that?

koffler
01-02-2017, 08:21 PM
I have the pre 1995 1.5 and 3's. Call bill arculetta (sp) in medford oregon. He re-did my reels about 4 yrs ago. I bought a handful of clutches so if u cant reach him let me know.

Jason
9168043346

koffler
01-02-2017, 08:24 PM
I have bills number in my pc. I will dig it up tomorrow.

koffler
01-02-2017, 08:26 PM
Last point, i like bauers, have a few. My favorite of all time are the old gunnissons. No reel is fool proof, i think you just have to enjoy the gear you have.

Jason

koffler
01-02-2017, 08:38 PM
Archuleta's Reel Works
ATTN: Bill Archuleta
733 Detrick Dr
Grants Pass, OR 97527

1 888 332 7335

Super nice guy. Good luck. I have his home # if you can't reach him.

Jason

koffler
01-02-2017, 09:27 PM
Don't soak it in whatever you are thinking about. The old LP's wear from that long half moon silver piece in the middle of the body losing tension or the cog goes out (these terms make sense in my head). Send it to Bill and he will fix at a fair price.

Bill Kiene semi-retired
01-02-2017, 09:43 PM
http://www.archuletasreelworks.com/

njbeast
01-03-2017, 10:24 AM
Had a problem with one of my Lamson's. Sent the reel in (G-3) and they replaced the entire drag assembly for $20.