Bill Kiene semi-retired
09-25-2014, 12:02 PM
http://sacramentooutboardservice.com/Home_Page.html
Mr Willison is actually an OMC factory trained instructor who teaches others how to work on the Evinrude and Johnson outboard motors.
If you have an Evinrude or John outboard motor then he can make it run.
He will work on your boat, motor, electronics and trailer as long as you have an OMC / Johnson / Evinrude motor.
His shop is in West Sacramento, California.
Sacramento Outboard
518 Glide Avenue, Unit J
West Sacramento CA 95691
sacoutboard@att.net
sobs@sacramentooutboardservice.com
T: 916.372.8811
F: 916.372.8655
C: 916.217.3930
Mr Willison is actually an OMC factory trained instructor who teaches others how to work on the Evinrude and Johnson outboard motors.
If you have an Evinrude or John outboard motor then he can make it run.
He will work on your boat, motor, electronics and trailer as long as you have an OMC / Johnson / Evinrude motor.
His shop is in West Sacramento, California.
Sacramento Outboard
518 Glide Avenue, Unit J
West Sacramento CA 95691
sacoutboard@att.net
sobs@sacramentooutboardservice.com
T: 916.372.8811
F: 916.372.8655
C: 916.217.3930